Skip to main content


  1. Pompa Kontrol
  2. CP110-GM

Product features

  • kuyu
  • terfi
  • surucu
  • verimlilik
  • oransal


    The Specifications of the PLC Controller:• 9 channel 24VDC PNP/NPN input
    • 6 channel 230VAC 5A relay output
    • 1 channel 0-10VDC/0-20mADC optional analog input (12-bit resolution)
    • 1 channel 0-20mADC analog output (14-bit resolution)
    • Can be expanded by maximum 16 expansion units due to the modular structure
    • Communication over the network via a 100MBit ethernet port
    • MODBUS TCP support
    • RS232 ve RS485 communication ports
    • MODBUS RTU support
    • Decimal operation support
    • 12ns processing speed
    • RTC (Real Time Clock)
    • Supplied by 24VDC
    • Power Consumption < 3W
    • Working temperature between 0°C and +50°C
    • Can be programmed with Ladder Logic Diagram Editor
    Power Supply:• 2.5A, 60W SMPS
    • 24VDC Output, 100-240VAC or 90 350VDC Input
    • Efficiency %88
    • Over power protection, over voltage protection
    • Working temperature between -25°C and +60°C
    Uninterruptible Power Supply:• DC UPS
    • Input 22.5V-28V, Output 24V
    • Output current 30A
    • At least 7 Ah 12V dry accumulator
    • Working temperature is between -40°C and +70°C
    GSM Communication:• 3G Industrial Router
    • Communication speed; 3G 14.4Mbps, 2G 236.8 Kbps
    • IEEE 802.11b/g/n, can be used as Wifi access point or station
    • 2 Ethernet ports
    • Routing, network protocols, firewall, DHCP, QoS, network backup, load balancing, DDOS prevention,
    port scanning prevention, WPA-2Ent Wifi
    encryption, mobile quota control, web filters, access control, VPN, APN
    • RutOS: Linux-based operating system
    • 1 digital input, 1 digital output
    • Operates with 9-30VDC
    • Power consumption < 5W
    • Working temperature is between -40°C and +75°C
    Energy Analyzer:• The measured parameters are: 3xV, 3xI, Frequency, W, Var, VA, kWh, kVarh, Min, Max, Demand, Cos φ
    • RS485 Modbus RTU Communication
    • LCD Screen
    • Sensitivity %0.5
    • Power Consumption < 4W
    • Working temperature is between -10°C and +55°C
    Analog Expansion Module:• 4 Channel 0-10VDC, 0-20mA, 4-20mA analog input
    • 2 Channel 0-10VDC, 0-20mA, 4-20mA analog output
    • The channels can be used as different input/output
    types independent of one another
    • Inputs and outputs are isolated by galvanization
    • 14-bit resolution
    Malfunction Indicators and Buttons:• 2 LEDs for malfunction indicator and run indicator
    • 3-step button (Koru1000 SCADA, Service/Stop mode, manual start mode)
    Panel Specifications and Dimensions:• PVC 40x60x22 cm
    Panel Weight:• 10,25 Kg


    Where can I use this product?• Drinking water applications
    • Agricultural irrigation applications
    • Management of process water
    In what kind of stations, I can use this product?• Well Pump Control
    • Lift Pump Control
    Automatic Operating Scenarios• Can work automatically depending on the linked water reservoir (Koru1000 Link)
    • Can work as booster pump (hydrophore mode)
    • Can work according to a time table
    Sensor supportUp to 4 analog sensors can be connected:
    • Flowmeter
    • Input pressure, output pressure, line pressure
    • Ground water level, reservoir level sensors
    • Remaining chlorine
    • Turbidity
    What happens when the communication is interrupted?Works automatically according to the determined time periods
    Hardware upgradeable?Yes
    7/24 system support?Yes
    Driver (frequency convertor) supportYes(Adaptive PID can be performed with respect to pressure, flow, ground water level or power.)
    Proportional actuator valve controlYes (1)
    Hardware upgradeable?Yes
    7/24 sistem desteğiYes
    Software supportIntegration to the Koru1000 water management system over Koru1000 cloud.
    External SCADA supportIntegration to all SCADA systems that supports Modbus TCP

          Copyright @ 2019. TEMSU | Tüm Hakları Saklıdır. Web design : Yavuz Media